Categories
SBAT-N1103-2-1/4" x 9" x 1" x 1/4"
Options
SBAT-N1103-0875-3000-03125-0125
SBAT-N1103-1000-5000-0500-04375
SBAT-N1103-1000-6000-03125-0375
SBAT-N1103-1250-6000-0250-01875
SBAT-N1103-1500-6000-0250-0250
SBAT-N1103-1750-7000-05625-03125
SBAT-N1103-1750-7000-06875-0250
SBAT-N1103-1750-7000-0750-03125
SBAT-N1103-1750-7000-0875-03125
SBAT-N1103-2000-7000-0625-0375
SBAT-N1103-2000-7000-0750-0250
SBAT-N1103-2000-7000-0875-01875
SBAT-N1103-2000-7000-1000-0250
SBAT-N1103-2125-6000-0750-0375
SBAT-N1103-2250-6000-05625-03125
SBAT-N1103-2250-9000-0750-03125
SBAT-N1103-2250-9000-1000-0250
SBAT-N1103-2375-7000-1000-0250
SBAT-N1103-2500-5000-1000-0500
SBAT-N1103-2500-6000-0875-0750
SBAT-N1103-2750-9500-0750-0375
SBAT-N1103-2750-9500-1000-0375
SBAT-N1103-3000-7000-1000-04375
Technical Data Sheet
Drawing Item Identification:
A: Bulb in inches
B: OA Width in inches
C: Tail Thickness in inches
R: Radius in inches
Additional information
| (A) Bulb in Inches | 2-1/4" |
|---|---|
| (B) OA Width in Inches | 9" |
| (C) Tail Thickness in Inches | 1" |
| (R) Radius in Inches | 1/4" |
| Tensile Strength (Die C ASTM D412) | 3000 psi (min) |
| Elongation at Rupture (ASTM D412) | 450% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 60 – 70 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% change in volume (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -40°C |
