Construction & Building Products Supplier
/
Rubber Gate Seals
/
Center Dome
/
Style 1-Transitional to a Flat Outside Bulb 90 Degree Corner
/
Style 1-Transitional to a Flat Outside Bulb 90-Natural 1177
/
S1-TFOB90-N1177-1-15/16″ x 5-5/8″ x 5/8″ x 1-13/16″ x 5/16″ x 11/16″ x 1/4″ x 18″ x 11/16″ x 9/16″
Categories
Categories
Construction & Building Products Supplier
/
Rubber Gate Seals
/
Center Dome
/
Style 1-Transitional to a Flat Outside Bulb 90 Degree Corner
/
Style 1-Transitional to a Flat Outside Bulb 90-Natural 1177
/
S1-TFOB90-N1177-1-15/16″ x 5-5/8″ x 5/8″ x 1-13/16″ x 5/16″ x 11/16″ x 1/4″ x 18″ x 11/16″ x 9/16″
S1-TFOB90-N1177-1-15/16" x 5-5/8" x 5/8" x 1-13/16" x 5/16" x 11/16" x 1/4" x 18" x 11/16" x 9/16"
Product Code: S1-TFOB90-N1177-19375-5625-0625-18125-03125-06875-0250-18000-06875-05625
You must be logged in.
Options
Description
Drawing Item Identification:
A: OA height in inches
B: OA width in inches
C: Block width in inches
D: Block height in inches
E: Off set in inches
F: Body thickness in inches
G: Recess in inches
H: Long legs in inches
R1: Dome radius in inches
R2: Radius in inches
NOTE: MATCH “A” DIMENSIONS FOR BOTH PARTS FOR PROPER SEAL ALIGNMENT. USE A 2″ BULB AND TAIL WITH THE 1-15/16″ DOME SEAL.
Solid Bulb and Tail Diagram
| A | B | C | R |
|---|---|---|---|
| 1-3/4″ | 7″ | 9/16″ | 5/16″ |
| 2″ | 7″ | 3/4″ | 1/4″ |
Additional information
| (A) OA height in inches | 1-15/16" |
|---|---|
| (B) OA width in inches | 5-5/8" |
| (C) Block width in inches | 5/8" |
| (D) Block height in inches | 1-13/16" |
| (E) Off set in inches | 5/16" |
| (F) Body thickness in inches | 11/16" |
| (G) Recess in inches | 1/4" |
| (H) Long legs in inches | 18" |
| (R1) Dome radius in inches | 11/16" |
| (R2) Radius in inches | 9/16" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 450% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 45 ± 5 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by weight (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -40°C |
