Categories
FOB90DC-N1187-1" x 5" x 1/2" x 16" x 7/16"
Options
FOB90DC-N1187-0875-3000-03125-10000-0125
FOB90DC-N1187-1000-5000-0500-16000-04375
FOB90DC-N1187-1000-6000-03125-16000-0375
FOB90DC-N1187-1250-6000-0500-16000-01875
FOB90DC-N1187-1500-6000-0500-16000-0250
FOB90DC-N1187-1750-7000-05625-18000-03125
FOB90DC-N1187-1750-7000-06875-16000-03125
FOB90DC-N1187-1750-7000-0750-16000-03125
FOB90DC-N1187-1750-7000-0875-16000-03125
FOB90DC-N1187-2000-7000-0875-16000-01875
FOB90DC-N1187-2000-7000-1000-16000-0250
FOB90DC-N1187-2250-6000-05625-16000-03125
FOB90DC-N1187-2250-6000-0750-16000-03125
FOB90DC-N1187-2250-7000-1000-18000-0250
FOB90DC-N1187-2375-7000-1000-18000-0250
FOB90DC-N1187-2500-6000-0875-16000-0375
FOB90DC-N1187-2750-6000-1000-16000-0375
FOB90DC-N1187-3000-7000-1000-18000-04375
Technical Data Sheet
Drawing Item Identification:
A: Bulb in inches
B: OA width in inches
C: Tail thickness in inches
D: Optional customer specified hole if needed
E. Side length in inches
R: Radius in inches
Additional information
| (A) Bulb in Inches | 1" |
|---|---|
| (B) OA Width in Inches | 5" |
| (C) Tail Thickness in Inches | 1/2" |
| (D) Optional Customer Specified Hole if Needed | – |
| (E) Side Length in Inches | 16" |
| (R) Radius in Inches | 7/16" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 400% (min) |
| 300% Modulus (ASTM D412) | – |
| Durometer Hardness, Shore Type A (ASTM D2240) | 50 – 60 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by volume (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 25% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | – |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -40°C |
