Flat Inside Bulb-Specified Degree Corner-Natural 1177
/
FIBSDC-N1177-2-1/2″ x 6″ x 7/8″ x 111 DEG x 12″ x 3/8″
Categories
Flat Inside Bulb-Specified Degree Corner-Natural 1177
/
FIBSDC-N1177-2-1/2″ x 6″ x 7/8″ x 111 DEG x 12″ x 3/8″
FIBSDC-N1177-2-1/2" x 6" x 7/8" x 111 DEG x 12" x 3/8"
Options
FIBSDC-N1177-1750-7000-05625-120-14000-03125
FIBSDC-N1177-1750-7000-05625-135-14000-03125
FIBSDC-N1177-1750-7000-0750-130-12000-03125
FIBSDC-N1177-2000-7000-1000-130-12000-0250
FIBSDC-N1177-2250-7000-1000-130-14000-0250
FIBSDC-N1177-2500-6000-0875-111-12000-0375
FIBSDC-N1177-2500-6000-0875-127-12000-0375
FIBSDC-N1177-2500-6000-0875-130-12000-0375
Technical Data Sheet
Drawing Item Identification:
A: Bulb in inches
B: OA width in inches
C: Tail thickness in inches
D: Optional customer specified hole if needed
E. Specified degree angle
F: Side length in inches
R: Radius in inches
Additional information
| (A) Bulb in inches | 2-1/2" |
|---|---|
| (B) OA Width in Inches | 6" |
| (C) Tail Thickness in Inches | 7/8" |
| (D) Optional Customer Specified Hole if Needed | – |
| (E) Specified Degree Angle | 111 DEG |
| (F) Side Length in Inches | 12" |
| (R) Radius in Inches | 3/8" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 450% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 45 ± 5 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by weight (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -40°C |
