Construction & Building Products Supplier
/
Rubber Gate Seals
/
Bulb and Tail
/
Flat Inside Bulb 90 Degree Corner
/
Flat Inside Bulb 90 Degree Corner-Neoprene 1501
/
FIB90DC-N1501-1-3/4″ x 7″ x 11/16″ x 10″ x 5/16″
Categories
Categories
Construction & Building Products Supplier
/
Rubber Gate Seals
/
Bulb and Tail
/
Flat Inside Bulb 90 Degree Corner
/
Flat Inside Bulb 90 Degree Corner-Neoprene 1501
/
FIB90DC-N1501-1-3/4″ x 7″ x 11/16″ x 10″ x 5/16″
FIB90DC-N1501-1-3/4" x 7" x 11/16" x 10" x 5/16"
Product Code: FIB90DC-N1501-1750-7000-06875-10000-03125
You must be logged in.
Options
FIB90DC-N1501-0875-3000-03125-7000-0125
FIB90DC-N1501-1000-5000-0500-11000-04375
FIB90DC-N1501-1000-6000-03125-10000-0375
FIB90DC-N1501-1250-6000-0500-10000-01875
FIB90DC-N1501-1500-6000-0500-10000-0250
FIB90DC-N1501-1750-7000-05625-11000-03125
FIB90DC-N1501-1750-7000-06875-10000-03125
FIB90DC-N1501-1750-7000-0750-10000-03125
FIB90DC-N1501-1750-7000-0875-10000-03125
FIB90DC-N1501-2000-7000-0875-10000-01875
FIB90DC-N1501-2000-7000-1000-10000-0250
FIB90DC-N1501-2250-6000-05625-10000-03125
FIB90DC-N1501-2250-6000-0750-10000-03125
FIB90DC-N1501-2250-7000-1000-11000-0250
FIB90DC-N1501-2375-7000-1000-11000-0250
FIB90DC-N1501-2500-6000-0875-11000-0375
FIB90DC-N1501-2750-6000-1000-10000-0375
FIB90DC-N1501-3000-7000-1000-11000-04375
Description
Drawing Item Identification:
A: Bulb in inches
B: OA width in inches
C: Tail thickness in inches
D: Optional customer specified hole if needed
E. Side length in inches
R: Radius in inches
Additional information
| (A) Bulb in inches | 1-3/4" |
|---|---|
| (B) OA Width in Inches | 7" |
| (C) Tail Thickness in Inches | 11/16" |
| (D) Optional Customer Specified Hole if Needed | – |
| (E) Side Length in Inches | 10" |
| (R) Radius in Inches | 5/16" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 400% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 60 – 70 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by weight (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -25°C |
