Categories
CDS4-N1501-1-1/4" x 4" x 1" x 1-1/2" x 1/2" x FLAT x 1" x 1/2"
Options
CDS4-N1501-1250-4000-1000-1500-0500-1000-0500
CDS4-N1501-1500-4500-1625-2500-1000-00625-00625
CDS4-N1501-1875-2375-0250-1125-0875-0750-0250
CDS4-N1501-2250-3000-0875-1500-1000-4625-0625-0125
CDS4-N1501-2250-5000-2000-2250-0625-8000-0250-0250
CDS4-N1501-2375-5000-2000-2250-0750-8000-0250-0250
CDS4-N1501-2750-5000-2000-2250-1125-8000-0250-0250
CDS4-N1501-2750-39375-16875-2000-1500-0250-0250
Technical Data Sheet
Drawing Item Identification:
A: OA height in inches
B: Edge to center width in inches
C: Edge of dome to center in inches
D: Tail width in inches
E: Tail thickness in inches
R1: Dome radius in inches
R2: Dome edge radius in inches
R3: Radius in inches
Additional information
| (A) OA height in inches | 1-1/4" |
|---|---|
| (B) Edge to center width in inches | 4" |
| (C) Edge of dome to center in inches | 1" |
| (D) Tail width in inches | 1-1/2" |
| (E) Tail thickness in inches | 1/2" |
| (R1) Dome radius in inches | FLAT |
| (R2) Dome edge radius in inches | 1" |
| (R3) Radius in inches | 1/2" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 400% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 60 – 70 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by weight (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -25°C |
