Construction & Building Products Supplier
/
Rubber Gate Seals
/
Center Dome
/
Style 3-Transitional to a Flat Inside Bulb -90 Degree Corner
/
Style 3-Transitional to a Flat Inside Bulb-90 Degree Corner-Natural 1177
/
S3-TFIB90DC-N1177-2-1/4″ x 7″ x 3/4″ x 18″ x 1-1/8″ x 1/4″
Categories
Categories
Construction & Building Products Supplier
/
Rubber Gate Seals
/
Center Dome
/
Style 3-Transitional to a Flat Inside Bulb -90 Degree Corner
/
Style 3-Transitional to a Flat Inside Bulb-90 Degree Corner-Natural 1177
/
S3-TFIB90DC-N1177-2-1/4″ x 7″ x 3/4″ x 18″ x 1-1/8″ x 1/4″
S3-TFIB90DC-N1177-2-1/4" x 7" x 3/4" x 18" x 1-1/8" x 1/4"
Product Code: S3-TFIB90DC-N1177-2250-7000-0750-18000-1125-0250
You must be logged in.
Options
Description
Drawing Item Identification:
A: OA height in inches
B: OA width in inches
C: Block tail in inches
D: Legs in inches
R1: Dome radius in inches
R2: Radius in inches
NOTE: MATCH “A” DIMENSIONS FOR BOTH PARTS FOR PROPER SEAL ALIGNMENT.
| A | B | C | R |
|---|---|---|---|
| 1-3/4″ | 7″ | 9/16″ | 5/16″ |
| 2″ | 7″ | 7/8″ | 3/16″ |
| 2-1/4″ | 9″ | 3/4″ | 5/16″ |
Additional information
| (A) OA height in inches | 2-1/4" |
|---|---|
| (B) OA width in inches | 7" |
| (C) Block tail in inches | 3/4" |
| (D) Legs in inches | 18" |
| (R1) Dome radius in inches | 1-1/8" |
| (R2) Radius in inches | 1/4" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 450% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 45 ± 5 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by weight (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -40°C |
