Construction & Building Products Supplier
/
Rubber Gate Seals
/
Bulb and Tail
/
Vertical Inside Bulb 90 Degree Corner
/
Vertical Inside Bulb 90 Degree Corner-Neoprene 1501
/
VIB90DC-N1501-2-1/4″ x 6″ x 3/4″ x 14″ x 5/16″
Categories
Categories
Construction & Building Products Supplier
/
Rubber Gate Seals
/
Bulb and Tail
/
Vertical Inside Bulb 90 Degree Corner
/
Vertical Inside Bulb 90 Degree Corner-Neoprene 1501
/
VIB90DC-N1501-2-1/4″ x 6″ x 3/4″ x 14″ x 5/16″
VIB90DC-N1501-2-1/4" x 6" x 3/4" x 14" x 5/16"
Product Code: VIB90DC-N1501-2250-6000-0750-14000-03125
You must be logged in.
Options
VIB90DC-N1501-0875-3000-03125-15000-0125
VIB90DC-N1501-1000-5000-0500-15000-04375
VIB90DC-N1501-1000-6000-03125-15000-0375
VIB90DC-N1501-1250-6000-0500-15000-01875
VIB90DC-N1501-1500-6000-0500-15000-0250
VIB90DC-N1501-1750-7000-05625-14000-03125
VIB90DC-N1501-1750-7000-06875-14000-03125
VIB90DC-N1501-1750-7000-0750-14000-03125
VIB90DC-N1501-1750-7000-0875-14000-03125
VIB90DC-N1501-2000-7000-0875-14000-01875
VIB90DC-N1501-2000-7000-1000-14000-0250
VIB90DC-N1501-2250-6000-05625-14000-03125
VIB90DC-N1501-2250-6000-0750-14000-03125
VIB90DC-N1501-2250-7000-1000-14000-0250
VIB90DC-N1501-2500-6000-0875-13000-0375
VIB90DC-N1501-2750-6000-1000-12000-0375
VIB90DC-N1501-3000-7000-1000-11000-04375
Description
Drawing Item Identification:
A: Bulb in inches
B: OA width in inches
C: Tail thickness in inches
D: Optional customer-specified hole if needed
E. Side length in inches
R: Radius in inches
Additional information
| (A) Bulb in Inches | 2-1/4" |
|---|---|
| (B) OA Width in Inches | 6" |
| (C) Tail Thickness in Inches | 3/4" |
| (D) Optional customer specified hole if needed | – |
| (E) Side length in inches | 14" |
| (R) Radius in Inches | 5/16" |
| Tensile Strength (Die C ASTM D412) | 2500 psi (min) |
| Elongation at Rupture (ASTM D412) | 400% (min) |
| 300% Modulus (ASTM D412) | 900 psi (min) |
| Durometer Hardness, Shore Type A (ASTM D2240) | 60 – 70 |
| Water Absorption (70 Hrs. @ 212°F ASTM D471) | 10% by weight (max) |
| Compression Set (ASTM D395 Method B 22 Hrs/ @ 158°F) | 30% (max) |
| Tensile Strength After Oxygen Bomb Aging (ASTM F572) | 80% (min) of tensile strength |
| Low Temperature Brittleness (ASTM D2137 Method A, 9.3.2) | Non-Brittle after 3' @ -25°C |
