Get a quote

Fablon MIL-C-882

Download Data Sheet

Fablon Data Sheet

Construction

Fablon is a high capacity preformed cushioning pad fabricated using multiple layers of high quality cotton polyester duck fabric, completely impregnated with a high-grade nitrile compound.

Compression

Fablon finished pads will withstand compressive loads perpendicular to the plane of laminations of 10,000 pounds minimum per square inch without detrimental reduction in thickness or extrusion.

Specifications

D.O.T. Federal Standard Specifications for Construction
Administration: of Roads and Bridges on Federal
Highway Projects (1985).
AASHTO: Standard Specifications for Highway Bridges.
Preformed Fabric Pads:
16th Edition – 18.10.2
17th Edition – 18.4.9.1
2nd ED.LRFD – 18.10.2
PCI: Prestressed Concrete Design Handbook
7th Edition (2010) Part 6, paragraph
6.10.3, Bearing Pad.
Military Specifications
MIL-C-882
MIL-E-5272A
MIL-STD-810

Comparable to

  • Fabreeka
  • Capralon
Part Number
  • Remove
  • F-FABLON-1X12X12
Dimensions
  • Remove
  • 12" x 12" x 1" thick
Weight
  • Remove
  • 7.3 lbs.
 Reset filters
F-FABLON-1X12X12 12" x 12" x 1" thick 7.3 lbs.
Fablon bearing pads comparable to fabreeka
Spec Sheet Get Quote

Material Properties

PropertyValue
ColorTan
FinishSmooth
Width48″
Elastomer TypeNitrile
Fungus ResistantPer Federal Std-191
FabricPolyester x Cotton
Durometer Hardness90 ±5
Meets Spec:Mil-C-882-E
AASHTO specification 18.10.2 LRFD

Typical Physical Properties

PropertyValue
Tensile (elastomer)1,000 PSI (min)
1,200 PSI (typical)
Ultimate Elongation (elastomer)600%
Durometer Hardness90 ±5
Specific Gravity1.21
Compressive Load10,000 PSI
Shear Modulus450 PSI
Permanent Set13% max @ 10,000 PSI
Temperature Range-20°F to +200°F

Sizes Available
1/16″ (1.6 mm)
3/32″ (2.4 mm)
1/8″(3.2 mm)
5/32″(4.0 mm)
3/16″(4.8 mm)
15/64″(6.0mm)
9/32″(7.0 mm)
11/32″(8.8 mm)
1/2″(12.7 mm)
5/8″(16.0 mm)
3/4″(19.0 mm)
1″(25.4 mm)

Fablon Nominal Deflection

Load PSI14 ply
15/64″
6mm		17 ply
9/32″
7mm		21 ply
11/32″
9mm		31 ply
1/2″
13mm		39 ply
5/8″
16mm		48 ply
3/4″
19mm		64 ply
1″
25mm		Load
MPa
50.003″.004″.005″.006″.008″.010″.013″0.35
.08mm.10mm.13mm.15mm.20mm.25mm.33mm
100.005″.006″.007″.010″.013″.015″.021″0.69
.13mm.15mm.18mm.25mm.33mm.38mm.53mm
200.008″.009″.012″.017″.021″.025″.034″1.40
.20mm.23mm.30mm.43mm.53mm.64mm.86mm
3000.010″.012″.015″.022″.028″.033″.044″2.10
.25mm.36mm.38mm.56mm.71mm.84mm1.12mm
400.012″.015″.018″.027″.033″.040″.053″2.80
.30mm.38mm.46mm.69mm.84mm1.02mm1.35mm
500.014″.017″.021″.031″.038″.046″.061″3.40
.36m.43mm.53mm.79mm.97mm1.17mm1.55mm
600.016″.019″.024″.034″.043″.052″.069″4.10
.41mm.48mm.61mm.86mm1.10mm1.32mm1.75mm
700.018″.021″.026″.038″.048″.057″.076″4.80
.46mm.53mm.66mm.97mm1.22mm1.45mm1.93mm
800.019″.023″.026″.041″.051″.062″.082″5.50
.48mm.58mm.71mm1.05mm1.30mm1.57mm2.08mm
900.020″.024″.030″.044″.054″.066″.087″6.20
.51mm.61mm.76mm1.12mm1.37mm1.68mm2.21mm
1000.022″.026″.032″.047″.058″.070″.093″6.90
.56mm.66mm.81mm1.19mm1.47mm1.78mm2.36mm
1200.024″.029″.036″.052″.065″.078″.104″8.30
.61mm.74mm.91mm1.32mm1.65mm1.96mm2.64mm
1400.027″.032″.039″.057″.071″.085″.113″9.70
.69mm.81mm.99mm1.45mm1.68mm2.16mm2.87mm
1600.029″.035″.042.062″.077″.092″.123″11.00
.74mm.89mm1.07mm1.57mm1.96mm2.34mm3.12mm
1800.031″.037″.045″.066″.083″.100″.132″12.40
.79mm.94mm1.14mm1.68mm2.11mm2.54mm3.35mm
2000.033″.039″.048″.070″.088″.105″.140″13.80
.84mm.99mm1.22mm1.78mm2.23mm2.67mm3.56mm
2023
Hanna Rubber Company

Quote Cart

Your cart is empty
Submit quote