Metal Detectable Silicone Sponge is the perfect solution to eroding particles from deteriorating seals from entering the process line. These particles can be easily detected with in-line metal detection systems. Allowing for a quick stop of production to remove the contaminated product and limiting loss.
Meets The Following Specification Requirements
- FAR 25
- JAR 25
- CS 25 Appendix F, Part 1
- (a)(1)(iv) AND (a)(1)(v) horizontal flamability tests
- Automotive Standard PART 571FMVSS302
Download Specification Sheet
Metal Detectable Silicone Sponge
Typical Physical Properties
Property | Units | Typical Value |
---|---|---|
Density | lb.ft.³ | 19.7 |
Elongation to Failure | % | 214 |
Compression Stress 40% Strain | (psi) | 16.3 |
Compression Set 50% comp. 24 hours recovery 22 hours @158°F | % | 5 |
Availability
Sheet goods 36″ x 36″ x 1/16″, 1/8″, 1/4″, 1/2″
Roll goods 36″ x 1/16″, 1/8″, 1/4″, 1/2″