Note : Grommets charted with the exception of AN930. Grommets listed are standard 1/16 groove width. AN931 drawing, however does provide for a larger groove width by addition of letters, A-1/8″, B-3/16″,C-1/4″, etc. Indicated example: AN931-B6-10. These can be supplied if order per above example. “S” between first and second dash number indicates split grommets available in all sizes.
Many grommets available in various groove widths – A, B, and C
| Part No. |
A
|
B
|
C
|
D
|
E
| Reset filters | ||
|---|---|---|---|---|---|---|---|---|
| (I.D) (O.D. Groove) (O.D.) (Width Groove) (Thickness) | (I.D) | (O.D. Groove) | (O.D.) | (Width Groove) | (Thickness) |
| ||
| AN931-2-9 | 1/8 | 9/16 | 3/4 | 1/16 | 3/16 |
| ||
| AN931-2-16 | 1/8 | 1 | 1-1/4 | 1/16 | 1/4 |
| ||
| AN931-3-5 | 3/16 | 5/16 | 7/16 | 1/16 | 3/16 |
| ||
| AN931-3-9 | 3/16 | 9/16 | 3/4 | 1/16 | 3/16 |
| ||
| AN931-3-10 | 3/16 | 5/8 | 7/8 | 1/16 | 3/16 |
| ||
| AN931-4-7 | 1/4 | 7/16 | 5/8 | 1/16 | 3/16 |
| ||
| AN931-4-12 | 1/4 | 3/4 | 1 | 1/16 | 1/4 |
| ||
| AN931-4-16 | 1/4 | 1 | 1-1/4 | 1/16 | 1/4 |
| ||
| AN931-5-9 | 5/16 | 9/16 | 13/16 | 1/16 | 5/16 |
| ||
| AN931-5-12 | 5/16 | 3/4 | 1 | 1/16 | 5/16 |
| ||
| AN931-5-13 | 5/16 | 13/16 | 1-1/16 | 1/16 | 5/16 |
| ||
| AN930-1 | 3/8 | 1/2 | 11/16 | 1/16 | 9/32 |
| ||
| AN930-2 | 3/8 | 1/16 | 3/4 | 1/16 | 3/8 |
| ||
| AN930-3 | 3/8 | 9/16 | 3/4 | 3/8 | 3/4 |
| ||
| AN931-6-10 | 3/8 | 5/8 | 7/8 | 1/16 | 5/16 |
| ||
| AN931-6-16 | 3/8 | 1 | 1-1/4 | 1/16 | 1/4 |
| ||
| AN931-7-11 | 7/16 | 11/16 | 15/16 | 1/16 | 5/16 |
| ||
| AN931-7-11 | 7/16 | 11/16 | 15/16 | 1/16 | 5/16 |
| ||
| AN930-4 | 1/2 | 3/4 | 1 | 3/32 | 9/32 |
| ||
| AN931-8-13 | 1/2 | 13/16 | 1-1/16 | 1/16 | 5/16 |
| ||
| AN931-8-20 | 1/2 | 1-1/4 | 1-1/2 | 1/16 | 1/4 |
| ||
| AN931-9-13 | 9/16 | 13/16 | 1-1/16 | 1/16 | 5/16 |
| ||
| AN931-10-14 | 5/8 | 7/8 | 1-1/8 | 1/16 | 5/16 |
| ||
| AN931-10-20 | 5/8 | 1-1/4 | 1-1/2 | 1/16 | 1/4 |
| ||
| AN931-11-16 | 11/16 | 1 | 1-5/16 | 1/16 | 3/8 |
| ||
| AN931-12-17 | 3/4 | 1-1/16 | 1-3/8 | 1/16 | 3/8 |
| ||
| AN931-12-20 | 3/4 | 1-1/4 | 1-5/8 | 1/16 | 1/4 |
| ||
| AN931-12-23 | 3/4 | 1-7/16 | 1-13/16 | 1/16 | 3/8 |
| ||
| AN931-12-26 | 3/4 | 1-5/8 | 2 | 1/16 | 3/8 |
| ||
| AN930-21 | 7/8 | 1-1/4 | 1-9/16 | 3/16 | 3/4 |
| ||
| AN931-14-20 | 7/8 | 1-1/4 | 1-5/8 | 1/16 | 7/16 |
| ||
| AN931-14-26 | 7/8 | 1-5/8 | 2 | 1/16 | 7/16 |
| ||
| AN931-16-22 | 1 | 1-3/8 | 1-3/4 | 1/16 | 7/16 |
| ||
| AN931-16-30 | 1 | 1-7/8 | 2-1/4 | 1/16 | 7/16 |
| ||
| AN931-A20-38 | 1-1/4 | 2-3/8 | 2-3/4 | 1/8 | 7/16 |
| ||
| AN931-A20-40 | 1-1/4 | 2-1/2 | 2-7/8 | 1/8 | 7/16 |
| ||
| AN931-A24-28 | 1-1/2 | 1-3/4 | 2-1/8 | 1/16 | 7/16 |
| ||
| AN931-A24-44 | 1-1/2 | 2-3/4 | 3-1/4 | 1/16 | 7/16 |
|
