Industrial Hose

Hanna Rubber offers unmatched expertise in designing and assembling efficient and cost effective industrial hose systems.

Our broad selection of hoses, fittings, clamps and our assembly expertise are unparalleled in the industry, offering unrivaled quality, performance and reliability.

Hanna is the perfect single source for hose assembly solutions in a wide range of markets.

We also make custom hose to meet your specific application.

No warranty is expressed or implied, as specific application parameters, such as temperature, pressure and chemical concentrations vary widely.

Furthermore, use of these hoses for handling multiple chemical products, either singly or as a mixture, may introduce uncontrollable factors relating to chemical resistance.

Before using any hose, the user is responsible for determining the suitability of the hose for the intended application.

Therefore, the user assumes all risk and responsibility for determining the suitability of any hose for handling any product, chemical or chemicals.

Available Industrial Hose


Hanna carries premium grade braided air hoses with excellent flexibility and resistance to air, water, petroleum oils, gasoline, kerosene, ozone, and including but not limited to lubricating oils.

Abrasions resistance for jobs in: mining, air, construction, food plants, automotive shops, agricultural.

Specifically made for: pneumatic tools, air service, paint equipment and coolant lines.

Available in low pressure low temperature low volume to high pressure, high temperature high volume applications.

Conductive and nonconductive hoses are also readily available.

A wide range of sizes and couplings in stock with a knowledgeable sales staff to handle your questions and needs.

General purpose black air hose

General Purpose Black Air Hose

Recommended For:

Air and water applications requiring maximum flexibility in any industry, including mining, construction, agriculture, vehicle repair and in-plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute solutions of herbicides

Red General Purpose Multipurpose Hose

General Purpose Red Air Hose

Recommended For:

Air and water applications requiring maximum flexibility in any industry, including mining, construction, agriculture, vehicle repair and in-plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute solutions of herbicides.

Premium Air Hose Premo-Flex

Premium Air Hose


A high-quality, air and multipurpose hose for industrial air service, compressor lines, pneumatic tools, low-pressure spray and many other applications where high oil resistance is required.  Non-conductive, minimum electrical resistance greater than one (1) megaohm per inch of length of hose at 1000 volts DC.

Push Lock Hose

Push Lock Hose

Recommended For:

Oil resistant hose can be used with air tools, to convey water, mild chemicals and various petroleum products.

Steel Wire hose

Steel Wire Air Hose

Recommended for:

High pressure air hose for heavy-duty use in mines, quarries construction and industry.

Yellow Heavy duty Washdown hose

Yellow Heavy Duty Washdown Hose (King Kong Hose)

Recommended for:

Heavy duty air, water and multi-purpose hose.

Yellow Heavy duty Washdown hose

White Washdown Hose

Recommended For:

Cold and hot water up to 212 F where steam is injected into the water. Used for paper mill, food handling or processing plant wash down service requiring hose with a non-marking cover

Recommended For:

Construction.  The Aquahammer hose is designed for new OSHA Respirable Crystalline Silica (RCS) Standard for Jackhammer Operation.   It is a twin lined system that delivers both air and water in a single, unitized configuration for silica dust suppression in pneumatic jackhammer applications. Aquahammer Hose is a safe and efficient way to comply with the OSHA standard.

Acids and chemicals run the scope from mild to volatile to corrosive to hazardous. Hanna Rubber acid and chemical transfer hose provides maximum protection for materials, equipment, operators and the environment.

Hanna Rubber is the first choice in developing and delivering acid-chemical transport hose. Our extensive product listing offers long-lasting, highly flexible, lightweight hose that is designed, engineered and manufactured to handle the most demanding corrosive substance transfer.

From EPDM to Neoprene covers, PTFE to polyethylene tubes, high flexibility for abrasion and chemical resistant capability, we have the perfect hose. Whether the work is acid discharge or suction, count on Hanna Rubber for optimal performance at a competitive price.

We are America’s first choice for acid and chemical transfer hose.

Chem Master Xtreme FEP hose

Chem Master Xtreme FEP (Stallion)

Recommended For:

Tank truck, barge, ship, or storage tank transfer of a variety of chemical products.

UHMW-PE Chemical Hose

UHMW-PE Chemical Hose

Recommended for:

Transfer of a variety of chemical products. Contains a wire helix for full suction capability

XLPE Cross-Linked Polyethylene Suction Hose

XLPE (Cross-linked Polyethylene)

Recommended For:

Handles 90% of the chemical/ acid applications and is used for in-plant or tank truck to transfer chemicals and solvents.

Hanna Rubber Company is a Distributor of Ducting Hose for Air, Fume, Light Weight Materials, Heavy Duty for severe service, High Abrasion, chemical, duct, dust, exhaust & flexible ducting hoses, A/C ventilation hoses, medium & high temperature hoses, exhaust fume & chemical fume.

Industry Applications – carpet cleaning,chemical plants, dust collection, mining,lawn &leaf collection.

Hoses. Standard lgnths of 25′ to 50’ft Available with operating temperatures from -200 degrees F to 1500 degrees F. Brand names including Flexaust, Hi-tech Duravent, Master Duct.

Ducting Hose

Ducting Hose

Recommended for:

Offers better tear strength, puncture and abrasion resistance than traditional reinforced woven neoprene

FlexStat CR, Clean Room Static Dissapative Hose

FlexStat CR (Clean Room)

Recommended for:

FlexStat CR is a static dissipative hose that was designed to be used for food and pharmaceutical clean rooms. FlexStat CR is an FDA acceptable hose that prevents static buildup to help reduce to possibility of an explosion.

PVC Ducting hose

PVC Ducting Hose

Recommended for:

For dust collecting, exhaust where airborne pollutants, fumes and odors are problematic. Also for use as an air transfer duct in HVAC units

PVC Light Duty Ducting hose

PVC Light Duty Ducting Hose

Recommended for:

Great flexibility and good abrasion resistance, provides a smooth interior for easy air flow, handles tight bends without kinking, excellent for both positive and negative pressure applications.

Urethane Ducting

Urethane Ducting Hose

Recommended for:

Air ventilation, Exhaust systems, Clear is FDA acceptable hose, Lint collection, Oil mist, Sheet metal, Textile Mills

Fire Protection

Hanna Rubber Company is one of the nation’s leaders in providing fire protection and fire style hose.

Fire Hose can be broken into three categories; attack, supply & relay, and forestry.

Attack hose is a fabric-covered, flexible hose used to bring water from the fire pumper to the nozzle. This hose ranges in nominal inside diameter from 1.5 in (38 mm) to 3.0 in (76 mm) and is designed to operate at pressures up to about 400 psi (2,760 kPa). The standard length is 50 ft (15.3 m).

Supply and relay hoses are large-diameter, fabric-covered, flexible hoses used to bring water from a distant hydrant to the fire pumper or to relay water from one pumper to another over a long distance. These hoses range in nominal inside diameter from 3.5 in (89 mm) to 5.0 in (127 mm). They are designed to operate at pressures up to about 300 psi (2,070 kPa) for the smaller diameters and up to 200 psi (1,380 kPa) for the larger diameters. The standard length is 100 ft (30.6 m).

Forestry hose is a fabric-covered, flexible hose used to fight fires in grass, brush, and trees where a lightweight hose is needed in order to maneuver it over steep or rough terrain. Forestry hose comes in 1.0 in (25 mm) and 1.5 in (38 mm) nominal inside diameters and is designed to operate at pressures up to about 450 psi (3,105 kPa).

Food and beverage manufacturers rely on Hanna Rubber to provide the industry’s leading hose brands, including Gates, Goodyear, Kuriyama, Parker, Dayco, Kanaflex, HBD Thermoid and Titan.

If you transfer wine, beer, potable water, oily and non-oily food material, Hanna Rubber is the best source for Food and Beverage hoses that meet FDA, USDA and 3-A requirements.

Flexible hose used for transferring edible food products in gravity
flow, pressure, or suction service.

Food discharge hose

Food Discharge Hose

Recommended for:

Pneumatic transfer of flour and other dry foods requiring hose with a sanitary FDA tube

Food suction hose

Food Suction Hose

Recommended for:

For suction, pneumatic or gravity transfer of flour, sugar, syrup or edible grains. Not recommended for vinegar, mustard or other compounds containing acetic acid.

Liquid food suction

Liquid Food Suction

Recommended for:

For suction and discharge of liquid food products, including oily edibles and beer.

PVC food hose with wire

PVC Food Hose with Wire

Recommended for:

Pneumatic conveying systems for powder, pellets or granular materials. Paper mill vacuum lines.


Volt Hose

Recommended for:

Heavy duty food grade static dissipative Polyurethane material handling hose.

Recommended For:

Hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Specially compounded cover to handle pressure washer environment.

Hot Tar Asphalt Hose


This hose is designed for the suction and discharge of hot tar and asphalt.

Hanna’s material handling hose is a smart choice for transferring or conveying bulk materials via suction, gravity, or pneumatic systems where abrasion resistance is the primary requirement.

Example: Dry cement, sand, gravel, feed, seed and slurries.

Material handling hose

Material Handling Hose

Recommended for:

Transfer of bulk material, abrasives, concrete, and cement

Material Handling 180 hose

Material Handling 180

Recommended For:

Transfer of bulk materials via suction pneumatic or gravity systems where abrasion resistance is the primary requirement and a static conductive hose is needed.

Sand blast hose

Sand Blast Hose

Recommended for:

For conveyance of highly abrasive materials in sandblasting/cleaning and general maintenance

Hot air blower hose

Hot Air Blower Hose

Recommended for:

Conveying hot air up to 350 °F from blower or compressor to storage tank used in the transfer of dry bulk commodities. Can also be used for transferring mild chemicals at ambient temperatures.

Hanna Rubber Company offers a broad range of high performance marine hose products for both the recreation and commercial boating industry. Contact one of knowledgeable sales representatives to discuss your individual requirements.

Open end water and coolant suction and discharge applications on marine and stationary engines.

Heavy-duty fabric reinforced hose with and without steel wire reinforcement to meet marine water and wet exhaust hose requirements. Hardwall and Softwall wet exhaust hose may be used for engine water circulation, discharge lines, heat exchangers and wet exhaust connections.

Corrugated wet exhaust hose for general purpose applications and suitable for coolant lines where tight bends are required.

Fuel line hose for commercial and recreational vessel fuel line, vent lines and emission control systems applications. Suitable for marine diesel, gasoline, gasohol fuels, hot oil, methanol and ethers up to 10%.

Fuel Fill hose designed to transfer fuel from filler neck to the fuel tank. Corrugated Fuel Fill hose suitable for fill applications where flexible hose is required.

Vacuum Tubing for windshield washers and vacuum-operated accessories.

Marine exhaust hardwall hoses

Marine Exhaust Hardwall

Recommended for:

Fuel, oil and hydraulic fluids, suction and discharge.  Suitable for exhaust gas from water cooled stationary or marine diesel engines.

Radiator hose

Radiator Hose

Recommended for:

Open end water discharge applications and coolant connections on marine and stationary engines where oil resistance is required

Silicone radiator hoses

Silicone Radiator Hose

Recommended for:

Heavy duty coolant hose for use in trucks and buses where severe temperatures and operating conditions exist. Resistant to oil, antifreeze, hardening, cracking, and weathering.


Hanna Rubber offers corrugated and stripwound metal hose assemblies as a durable solution to high temperature or aggressive chemical needs. Metal hoses can handle extreme temperatures up to 1800°F. They are very durable and resistant to abrasion, crushing, bursting, cracking and are able to retain their shape under vacuum.

Petroleum suction and discharge

Hanna’s petroleum hose is a smart choice for transferring or conveying alternative fuels such as bio-diesel, bio-diesel blends, ethanol and ethanol blends.

It also can be used for transfer of commercial gasoline, diesel fuels, oils and other petroleum products. It is ideal for tank truck, terminal loading and in-plant operations.

Pressure Wash Hose Assemblies

Hanna Rubber offers the following pressure wash hoses for sale at our online store. These hoses are Not Recommended for Steam. Please contact us for custom hose sizes or attachments.

Steam hose

Recommended for:

Conveyance of steam in chemical/petroleum, food, lumber, pulp, processing industries.

Hanna carries premium grade water hose. Made from rubber and or PVC available in sizes ½ to 24 in.

Abrasion resistance for jobs in: mining, construction, food plants, rock quarries, and including but not limited to agricultural applications.

Available in low pressure thin walled discharge to thick wall suction hoses. We are capable of assembling any type of ends from flanges to cam and groove.

Mill hose

Mill Discharge Hose

Recommended for:

Water discharge service in rental yards, fleet service, municipal washdown, utility dewatering

PVC water discharge hose

PVC Discharge Hose

Recommended for:

General purpose water discharge in construction, agriculture and drip irrigation

Ironsides PVC Discharge Hose

Recommended for:

A heavy duty PVC water discharge hose in construction, agriculture and drip irrigation

PVC water suction hose

PVC Suction Hose

Recommended for:

Construction and mining supply lines, Irrigation lines, rock dusting, WellPoint systems, Agri-foam systems, Miscellaneous agricultural applications, Liquid fertilizer transfer

Rubber water discharge hose

Rubber Water Discharge Hose

Recommended for:

General construction, mines and water discharge and equipment rental.

Rubber water discharge hose

Rubber Water Suction Hose

Recommended for:

Suction, discharge or gravity flow of water in construction, mining, oil exploration.

Get a Quote

No finding what you need?

Contact us to get what you want, when you want it.